Impact Performance of Concrete Beams

There is increasing demand for testing concrete beams in an impact 3-point bend configuration. We recommend a CEAST 9350 or CEAST 9340 for this testing depending on the maximum energy required. We developed a custom fixture with 300mm span, dedicated tup insert and used the DAS 64k and VisualIMPACT software for data acquisition.

Samples were 400mm x 100mm x 100mm and tested at up to 4.65m/s. The velocity could be increased if required. Tests showed the failure modes and were designed to simulate larger structures which would require much more energy to test than can be achieved in the lab. The types of results compared were total energy absorbed, maximum load, energy to failure and displacement to failure.

The 9300 series is well suited for helping customers determine the performance characteristics of their materials when subjected to an impact event. The information gathered by doing instrumented impact testing can be used to provide the customer with a data baseline whereby they can determine how changes made in the mix of raw materials will perform in real life situations. A broader range of testing could be accomplished with the inclusion of an environmental chamber to study impact characteristics at different temperatures as well as using different fixtures and inserts to simulate other unsupported spans and impact events.